› Introduction - Ludovic Chamoin, Laboratoire de Mécanique et Technologies
10:15-10:45 (30min)
› Blending verification in domain decomposition methods to achieve high quality simulations without over-solving - Pierre Gosselet, Laboratoire de Mécanique et Technologie
10:45-11:05 (20min)
› Fast inverse modeling technique to reconstruct a laminar flow: Application to a part of Versailles water network - Julien Waeytens, Institut Français des Sciences et Technologies des Transports, de l'Aménagement et des Réseaux
11:05-11:25 (20min)
› Material parameters identification for optimized loading path - Elisabete Ferreira, Department of Mechanical Engineering, Centre for Mechanical Technology and Automation, GRIDS, University of Aveiro
11:25-11:45 (20min)
› Identification of some statistical parameters of a random heterogeneous medium using measurements of the surface wavefield - Shahram KHAZAIE, Ecole Centrale Paris
11:45-12:05 (20min)
10:15 - 12:05 (1h50)
Numerical Fluids Mechanics
Badiane
H. Beaugendre
› Introduction - H. Beaugendre, MC2
10:15-10:45 (30min)
› Modeling and simulation of compressible multi-material interface instabilities - Alexia de Brauer, Institut de Mathématiques de Bordeaux
10:45-11:05 (20min)
› A spectral volume-penalisation method for thermal fluid-structure interaction in phase-separating binary systems - Domenico Borzacchiello, Institut de Recherche en Génie Civil et Mécanique
11:05-11:25 (20min)
› Modeling the transient radiation by fluid-interacting shell systems - Hugo Santos, Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University
11:25-11:45 (20min)
› Lagrangian sharp interface schemes for multimaterials - Thomas Milcent, Institut de Mécanique et d'Ingenierie de Bordeaux
11:45-12:05 (20min)
› Accelerating CFD via local POD plus Galerkin projection - Filippo Terragni, Gregorio Millan Institute for Fluid Dynamics, Nanoscience and Industrial Mathematics, Universidad Carlos III de Madrid
14:00-14:20 (20min)
› Computation of nonlinear streaky structures in boundary layer flow - Juan Martin, Universidad Politécnica de Madrid
14:20-14:40 (20min)
› Multiscale modeling and systemic analysis of chemical vapor deposition processes - Nikolaos Cheimarios, National Technical University of Athens
14:40-15:00 (20min)
› Using the flexible multibody approach to estimate bone strain during physical activity: quantifying osteogenic potential - Adam Klodowski, Lappeenranta University of Technolog
15:00-15:20 (20min)
› High performance computing of sintering process at particle scale - Daniel Pino Muñoz, Laboratoire Georges Friedel - UMR CNRS 5307
15:20-15:40 (20min)
14:00 - 15:20 (1h20)
PhD Olympiads
Badiane
L. Chamoin
› Variational Formulations and Functional Approximation Algorithms in Stochastic Plasticity of Materials - Bojana Rosic, TU Braunschweig
14:00-14:20 (20min)
› Wave Based Methods to predict the dynamic behaviour of poroelastic materials - Elke Deckers, KU Leuven, Department of Mechanical Engineering
14:20-14:40 (20min)
› Modal approach and Padé approximants for the efficient modelling of sound absorbing porous materials in structural-acoustic finite element problems - romain rumpler, Marcus Wallenberg Laboratory, Laboratoire de Mécanique des Structures et des Systèmes Couplés
14:40-15:00 (20min)
› Development of shear and cross section deformable beam finite elements applied to large deformation and dynamics problems - Karin Nachbagauer, Upper Austria University of Applied Sciences
15:00-15:20 (20min)
› Multi-scale modelling of damage and fracture - E. W. C. Coenen, Technical Sciences
16:15-16:45 (30min)
› Reduced models for optimal control, shape optimization and inverse problems in haemodynamics - Andrea Manzoni, Scuola Internazionale Superiore di Studi Avanzati / International School for Advanced Studies
16:45-17:15 (30min)
› Uncertainty Quantification in Flight Dynamics Modelling - Andrew McCracken, School of Engineering
10:45-11:05 (20min)
› Influence of Friction Stir Welding residual stresses on the mechanical behaviour of aluminium stiffened panels - Rui Paulo, University of Aveiro
11:05-11:25 (20min)
› Numerical simulation and design of extruded integrally stiffened panels (ISP) for aeronautic applications subjected to blast loading: Sensitivity analyses to different stiffener configurations - Diogo Cardoso, University of Aveiro
11:25-11:45 (20min)
› Performance Analysis of Flapping Wings in Formation Flights - Mehdi Ghommem, Center for Numerical Porous Media (NumPor) - King Abdullah University of Science and Technology
11:45-12:05 (20min)
10:15 - 12:05 (1h50)
Optimization
Badiane
A. Andrade-Campos
› Introduction - António Andrade-Campos, Universidade de Aveiro
10:15-10:45 (30min)
› On the development of a multiscale topology optimisation tool - João Dias-de-Oliveira, University of Aveiro
10:45-11:05 (20min)
› Numerical methodologies for sheet metal forming inverse problems - António Andrade-Campos, University of Aveiro
11:05-11:25 (20min)
› A force-based formulation for the 2nd order elastoplastic analysis of frames - Theodoros Patsios, National Technical University of Athens
11:25-11:45 (20min)
› Control of an offshore wind turbine modeled as discrete system - Pedro Guimarães, Universidade de Brasília - Faculdade de Tecnologia
11:45-12:05 (20min)
› Toward alternative bounding techniques for robust goal-oriented error estimation applied to linear problems - Florent PLED, Laboratoire de Mécanique et Technologies
14:00-14:20 (20min)
› Adaptive numerical simulation of contact problems. Resolving local effects at the contact boundary in space and time. - Mirjam Walloth, Technische Universität Darmstadt, Fachbereich Mathematik, AG Numerik und Wissenschaftliches Rechnen
14:20-14:40 (20min)
› Development of a stabilised Petrov-Galerkin formulation for low-order tetrahedral meshes in Lagrangian fast solid dynamics - Chun Hean Lee, Swansea University
14:40-15:00 (20min)
› The adjoint-weighted equation method for the direct solution of inverse problems of elasticity - Uri Albocher, Faculty of Engineering, Tel Aviv University
15:00-15:20 (20min)
14:00 - 15:20 (1h20)
PhD Olympiads
Badiane
C. Dobrzynski
› Aerodynamic shape optimization of rotary wing aircraft components using an advanced multiobjective evolutionary approach - Claudio Comis Da Ronco, University of Padua
14:00-14:20 (20min)
› Coarse-grained molecular dynamics and continuum models for the transport of protein molecules - Marco Bacci, Dipartimento di Ingegneria Civile e Ambientale
14:20-14:40 (20min)
› Inverse problems in fluid-structure interaction: Application to hemodynamics - Cristobal Bertoglio, REO
14:40-15:00 (20min)
› Towards simultaneous meta-modeling for both the output and input spaces in the context of design shape optimization using asynchronous high-performance computing - Balaji Raghavan, Laboratoire Roberval - Unité de recherche en mécanique, Laboratoire de Génie Civil et Génie Mécanique
15:00-15:20 (20min)
› Innovative isogeometric formulations for shear deformable beams and plates - Josef Kiendl, University of Pavia
16:00-16:20 (20min)
› Behaviour of upwind schemes in low Mach number flow - Simon Delmas, CAGIRE, Laboratoire de Mathématiques et de leurs Applications [Pau]
16:20-16:40 (20min)
› Patient-specific isogeometric analysis for vascular biomechanics - Mauro Ferraro, Center for Advanced Numerical Simulations, Istituto Universitario di Studi Superiori di Pavia
16:40-17:00 (20min)
› On the high-order reconstruction for Meshfree Particle Methods in Numerical Flow Simulation - gilles-alexis Renaut, Laboratoire de Mecanique des Fluides et d'Acoustique
17:00-17:20 (20min)
› Isogeometric analysis for anti-plane fracture problems - Marco Pingaro, Institute for Advanced Studies (IUSS), Department of Civil Engineering and Architecture, University of Pavia
17:20-17:40 (20min)
16:00 - 17:40 (1h40)
Structural Analysis
Badiane
› Influence of strain-induced crystallization on the crack driving force in fracture behavior of rubber - Joachim Guilie, Laboratoire de mécanique des solides
16:00-16:20 (20min)
› A massively parallel program to solve the phase field formulation for crack propagation - Vahid Ziaei-Rad, Laboratori de Càlcul Numèric
16:20-16:40 (20min)
› Ductile fracture modeling considering plasticity and damage evolution combined with the strong discontinuity method - Jérémie BUDE, Laboratoire Roberval
16:40-17:00 (20min)
› Numerical Modelling of Piezoelectric Energy Harvesting Devices - Srivathsan RAVI, University of Luxembourg, Research Unit in Engineering Science
17:00-17:20 (20min)
› Application of the integral approach and wavelet transform in simulating and analysis of guided waves excitation by axisymmetric partially debonded piezoactuators - Mikhail Golub, Institute for Mathematics, Mechanics and Informatics, Kuban State University
17:20-17:40 (20min)
› Eddy current interaction between a probe coil and a conducting plate - Vianney REAL, Demaldent, Goubet, Darbas
10:15-10:35 (20min)
› Quasi-Gasdynamic Algorithm for Magnetohydrodynamic Shallow Water Equations - Maria Istomina, Keldysh Institute of Applied Mathematics
10:35-10:55 (20min)
› Numerical investigation of interaction between shock waves and dusty flows - Susanna Carcano, Modeling and Scientific Computing [Milano]
10:55-11:15 (20min)
› A second order cartesian scheme for BGK equation - Florian Bernard, Institut de Mathématiques de Bordeaux, Politecnico di Torino [Torino]
11:15-11:35 (20min)
› Gas influence in drop impact on dry solid substrates - Zhen JIAN, Institut Jean Le Rond d'Alembert
11:35-11:55 (20min)
10:15 - 11:55 (1h40)
Structural Analysis
Badiane
› Geometrically exact multi-layer beams with a rigid interconnection - Leo Škec, University of Rijeka Faculty of Civil Engineering
10:15-10:35 (20min)
› Interface finite elements for parametric study of structures with thin constrained layer damping - Lucie Rouleau, Laboratoire de Mécanique des Structures et des Systèmes Couplés, DCNS Group [Nantes]
10:35-10:55 (20min)
› A geometrically exact spatial beam finite element based on the fixed-pole approach - Maja Gacesa, Faculty of Civil Engineering, University of Rijeka
10:55-11:15 (20min)
› On spectral approximation algorithm for thermoelastic shells in the nonclassical theory of thermoelasticity with three phase-lags - Gia Avalishvili, Faculty of Exact and Natural Sciences, Iv. Javakhishvili Tbilisi State University
11:15-11:35 (20min)
› On the analysis of thin walled members in the framework of the Generalized Beam Theory - Alejandro Gutierrez, Università di Bologna - Rosario Miletta, Università di Bologna - Stefano de Miranda, Università di Bologna - Francesco Ubertini, Università di Bologna
11:35-11:55 (20min)
› A micro-meso bridge for the mesoscale modelling of woven composites - Enrico Obert, LMT Cachan
10:15-10:35 (20min)
› Some approaches to modeling of the effective properties for thermoelastic composites - Anna Nasedkina, Southern Federal University
10:35-10:55 (20min)
› A multi-scale coupling method to simulate the silica glass behavior under high pressures - Mohamed JEBAHI, Institut de Mécanique et d'Ingénierie -Durabilité Matériaux des Assemblages et des Structures
10:55-11:15 (20min)
› Dimensionality reduction of a complex constitutive law for Ceramic Matrix Composites - Orestis Friderikos, Laboratoire de Mécanique et Technologie
11:15-11:35 (20min)
› Biaxial seismic behaviour of reinforced concrete columns - Hugo Rodrigeus, Civil Engineering Department, University of Aveiro, Aveiro, Portugal
11:35-11:55 (20min)
10:15 - 12:25 (2h10)
High Performance Computing
Badiane
R. Poncet
› High performance computing challenges for research and industrial simulation codes - Raphaël Poncet, Commissariat à l'énergie atomique - Direction des applications militaires - Ile-de-France au C
10:15-10:45 (30min)
› Combining recent HPC techniques for 3D geophysics acceleration - Lionel BOILLOT, MAGIQUE-3D
10:45-11:05 (20min)
› Efficient computation of large array-based mechanical structures - Augustin Parret-Fréaud, ENSTA ParisTech - Unité de Mécanique
11:05-11:25 (20min)
› A new C++ workbench to develop discrete element simulations: GranOO - Damien André, I2M-MPI
11:25-11:45 (20min)
› Development of a parallel third order explicit multirate scheme - Bruno Seny, Institute of Mechanics, Materials and Civil Engineering
11:45-12:05 (20min)
› Multi-domain large deformations by monolithic approach for massive parallel computing -
12:05-12:25 (20min)
› On the modelling of the aggregates' elasticity in a concentrated suspension of CNTs - Emmanuelle Abisset-Chavanne, Institut de Recherche en Génie Civil et Mécanique
14:00-14:20 (20min)
› Patient-specific finite element analysis of transcatheter aortic valve implantation - Simone Morganti, University of Pavia
14:20-14:40 (20min)
› Modeling of Active Skeletal Muscle - Johannes Weickenmeier, Swiss Federal Institute of Technology Zurich
14:40-15:00 (20min)
› Finite element modeling of the electromechanical coupling in electroactive polymers - Mahmood Jabareen, Technion - Israel Institute of Technology
15:00-15:20 (20min)
14:00 - 15:30 (1h30)
Model Reduction
Badiane
A. Nouy
› Introduction - Anthony Nouy, Institut de Recherche en Génie Civil et Mécanique
14:00-14:30 (30min)
› A data compression technique for PGD reduced-order modeling - Matteo Capaldo, Laboratoire de Mécanique et Technologie
14:30-14:50 (20min)
› Virtual charts for shape optimization of structures - amaury courard, Laboratoire de Mécanique et Technologie, EADS Astrium
14:50-15:10 (20min)
› A reduced numerical strategy based on PGD for composite shell structures simulations - Etienne Prulière, Institut de Mécanique et d'Ingénierie de Bordeaux
15:10-15:30 (20min)
› Adaptive Multigrid Methods for Fluid-Structure Interaction (FSI) Optimization in an Aircraft and Design of Integrated Structural Health Monitoring (SHM) Systems - Bhuiyan Shameem Mahmood Ebna Hai, Helmut Schmidt University, University of the Federal Armed Forces Hamburg
16:00-16:20 (20min)
› A study of flow and initial stage of water condensation in the exhaust jet of the aircraft turbofan engine - Maria Lobanova, Baltic State Technical University
16:20-16:40 (20min)
16:00 - 16:40 (40min)
Verification & Validation
Badiane
F. Pled
› Goal-oriented model calibration using the adjoint framework - Ludovic Chamoin, Laboratoire de Mécanique et Technologies
16:00-16:20 (20min)
› Mechanical behavior of mild steel up to rupture: characterization and validation - Nelson Souto, Université de Bretagne Sud, Universidade de Aveiro
16:20-16:40 (20min)
› Numerical study of helium jet injection into channel with sudden expansion - Svetlana Valger, Novosibirsk State University of Architecture and Civil Engineering (Sibstrin)
10:15-10:35 (20min)
› Coupling two cell-centered finite volume schemes for solving anisotropic diffusion and fluid dynamics on unstructured moving meshes - Pascal JACQ, CEA Cesta
10:35-10:55 (20min)
› Adaptive Full-Multigrid algorithms based on Riemannian metrics - Gautier Brèthes, SCIPORT
10:55-11:15 (20min)
› Immersing NURBS for CFD applications - Jérémy Veysset, École des mines de Paris
11:15-11:35 (20min)
10:15 - 11:15 (1h)
Model Reduction
Badiane
› Hierarchical low-rank approximation of tensors by successive rank one corrections for preconditioning and solving high dimensional linear systems - Loïc Giraldi, Institut de Recherche en Génie Civil et Mécanique
10:15-10:35 (20min)
› A Tensor-Based Algorithm for the Optimal Model Reduction of High Dimensional Problems - Olivier Zahm, Institut de Recherche en Génie Civil et Mécanique
10:35-10:55 (20min)
› Combining proper orthogonal decomposition and residual estimates for fast time integration of PDEs - Maria-Luisa Rapun, Universidad Politécnica de Madrid
10:55-11:15 (20min)
Agora
https://yic2013.sciencesconf.org/data/program/Abstract_Bal.pdf
