Planning NEW!
Monday, September 2, 2013
| Time |
Event |
|
|
08:15 - 09:00
|
Registration and welcome - Opening |
|
|
09:00 - 10:00
|
Plenary Session 1 (Agora) - G. Bal |
|
|
10:00 - 10:15
|
Coffee Break |
|
|
10:15 - 12:05
|
Verification & Validation (Agora) - L. Chamoin |
|
| 10:15 - 10:45 |
› Introduction - Ludovic Chamoin, Laboratoire de Mécanique et Technologies |
|
| 10:45 - 11:05 |
› Blending verification in domain decomposition methods to achieve high quality simulations without over-solving - Pierre Gosselet, Laboratoire de Mécanique et Technologie |
|
| 11:05 - 11:25 |
› Fast inverse modeling technique to reconstruct a laminar flow: Application to a part of Versailles water network - Julien Waeytens, Institut Français des Sciences et Technologies des Transports, de l'Aménagement et des Réseaux |
|
| 11:25 - 11:45 |
› Material parameters identification for optimized loading path - Elisabete Ferreira, Department of Mechanical Engineering, Centre for Mechanical Technology and Automation, GRIDS, University of Aveiro |
|
| 11:45 - 12:05 |
› Identification of some statistical parameters of a random heterogeneous medium using measurements of the surface wavefield - Shahram KHAZAIE, Ecole Centrale Paris |
|
|
10:15 - 12:05
|
Numerical Fluids Mechanics (Badiane) - H. Beaugendre |
|
| 10:15 - 10:45 |
› Introduction - H. Beaugendre, MC2 |
|
| 10:45 - 11:05 |
› Modeling and simulation of compressible multi-material interface instabilities - Alexia de Brauer, Institut de Mathématiques de Bordeaux |
|
| 11:05 - 11:25 |
› A spectral volume-penalisation method for thermal fluid-structure interaction in phase-separating binary systems - Domenico Borzacchiello, Institut de Recherche en Génie Civil et Mécanique |
|
| 11:25 - 11:45 |
› Modeling the transient radiation by fluid-interacting shell systems - Hugo Santos, Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University |
|
| 11:45 - 12:05 |
› Lagrangian sharp interface schemes for multimaterials - Thomas Milcent, Institut de Mécanique et d'Ingenierie de Bordeaux |
|
|
12:05 - 14:00
|
Lunch |
|
|
14:00 - 15:40
|
PhD Olympiads (Agora) - C. Dobrzynski |
|
| 14:00 - 14:20 |
› Accelerating CFD via local POD plus Galerkin projection - Filippo Terragni, Gregorio Millan Institute for Fluid Dynamics, Nanoscience and Industrial Mathematics, Universidad Carlos III de Madrid |
|
| 14:20 - 14:40 |
› Computation of nonlinear streaky structures in boundary layer flow - Juan Martin, Universidad Politécnica de Madrid |
|
| 14:40 - 15:00 |
› Multiscale modeling and systemic analysis of chemical vapor deposition processes - Nikolaos Cheimarios, National Technical University of Athens |
|
| 15:00 - 15:20 |
› Using the flexible multibody approach to estimate bone strain during physical activity: quantifying osteogenic potential - Adam Klodowski, Lappeenranta University of Technolog |
|
| 15:20 - 15:40 |
› High performance computing of sintering process at particle scale - Daniel Pino Muñoz, Laboratoire Georges Friedel - UMR CNRS 5307 |
|
|
14:00 - 15:20
|
PhD Olympiads (Badiane) - L. Chamoin |
|
| 14:00 - 14:20 |
› Variational Formulations and Functional Approximation Algorithms in Stochastic Plasticity of Materials - Bojana Rosic, TU Braunschweig |
|
| 14:20 - 14:40 |
› Wave Based Methods to predict the dynamic behaviour of poroelastic materials - Elke Deckers, KU Leuven, Department of Mechanical Engineering |
|
| 14:40 - 15:00 |
› Modal approach and Padé approximants for the efficient modelling of sound absorbing porous materials in structural-acoustic finite element problems - romain rumpler, Marcus Wallenberg Laboratory, Laboratoire de Mécanique des Structures et des Systèmes Couplés |
|
| 15:00 - 15:20 |
› Development of shear and cross section deformable beam finite elements applied to large deformation and dynamics problems - Karin Nachbagauer, Upper Austria University of Applied Sciences |
|
|
15:45 - 16:15
|
Coffee Break |
|
|
16:15 - 17:15
|
ECCOMAS Award Presentations (Agora) - L. Chamoin |
|
| 16:15 - 16:45 |
› Multi-scale modelling of damage and fracture - E. W. C. Coenen, Technical Sciences |
|
| 16:45 - 17:15 |
› Reduced models for optimal control, shape optimization and inverse problems in haemodynamics - Andrea Manzoni, Scuola Internazionale Superiore di Studi Avanzati / International School for Advanced Studies |
|
|
17:30 - 18:00
|
Lightning Talks Session (Agora) - C. Dobrzynski |
|
|
18:00 - 19:00
|
Welcoming Cocktail |
|
Tuesday, September 3, 2013
| Time |
Event |
|
|
09:00 - 10:00
|
Plenary Session 2 (Agora) - N. Autrusson |
|
|
10:00 - 10:15
|
Coffee Break |
|
|
10:15 - 12:05
|
Applications in Aeronautics (Agora) - J. M. Guimard |
|
| 10:15 - 10:45 |
› Introduction - Jean-Mathieu Guimard, EADS Innovation Works [Suresnes] |
|
| 10:45 - 11:05 |
› Uncertainty Quantification in Flight Dynamics Modelling - Andrew McCracken, School of Engineering |
|
| 11:05 - 11:25 |
› Influence of Friction Stir Welding residual stresses on the mechanical behaviour of aluminium stiffened panels - Rui Paulo, University of Aveiro |
|
| 11:25 - 11:45 |
› Numerical simulation and design of extruded integrally stiffened panels (ISP) for aeronautic applications subjected to blast loading: Sensitivity analyses to different stiffener configurations - Diogo Cardoso, University of Aveiro |
|
| 11:45 - 12:05 |
› Performance Analysis of Flapping Wings in Formation Flights - Mehdi Ghommem, Center for Numerical Porous Media (NumPor) - King Abdullah University of Science and Technology |
|
|
10:15 - 12:05
|
Optimization (Badiane) - A. Andrade-Campos |
|
| 10:15 - 10:45 |
› Introduction - António Andrade-Campos, Universidade de Aveiro |
|
| 10:45 - 11:05 |
› On the development of a multiscale topology optimisation tool - João Dias-de-Oliveira, University of Aveiro |
|
| 11:05 - 11:25 |
› Numerical methodologies for sheet metal forming inverse problems - António Andrade-Campos, University of Aveiro |
|
| 11:25 - 11:45 |
› A force-based formulation for the 2nd order elastoplastic analysis of frames - Theodoros Patsios, National Technical University of Athens |
|
| 11:45 - 12:05 |
› Control of an offshore wind turbine modeled as discrete system - Pedro Guimarães, Universidade de Brasília - Faculdade de Tecnologia |
|
|
12:05 - 14:00
|
Lunch |
|
|
14:00 - 15:20
|
PhD Olympiads (Agora) - L. Chamoin |
|
| 14:00 - 14:20 |
› Toward alternative bounding techniques for robust goal-oriented error estimation applied to linear problems - Florent PLED, Laboratoire de Mécanique et Technologies |
|
| 14:20 - 14:40 |
› Adaptive numerical simulation of contact problems. Resolving local effects at the contact boundary in space and time. - Mirjam Walloth, Technische Universität Darmstadt, Fachbereich Mathematik, AG Numerik und Wissenschaftliches Rechnen |
|
| 14:40 - 15:00 |
› Development of a stabilised Petrov-Galerkin formulation for low-order tetrahedral meshes in Lagrangian fast solid dynamics - Chun Hean Lee, Swansea University |
|
| 15:00 - 15:20 |
› The adjoint-weighted equation method for the direct solution of inverse problems of elasticity - Uri Albocher, Faculty of Engineering, Tel Aviv University |
|
|
14:00 - 15:20
|
PhD Olympiads (Badiane) - C. Dobrzynski |
|
| 14:00 - 14:20 |
› Aerodynamic shape optimization of rotary wing aircraft components using an advanced multiobjective evolutionary approach - Claudio Comis Da Ronco, University of Padua |
|
| 14:20 - 14:40 |
› Coarse-grained molecular dynamics and continuum models for the transport of protein molecules - Marco Bacci, Dipartimento di Ingegneria Civile e Ambientale |
|
| 14:40 - 15:00 |
› Inverse problems in fluid-structure interaction: Application to hemodynamics - Cristobal Bertoglio, REO |
|
| 15:00 - 15:20 |
› Towards simultaneous meta-modeling for both the output and input spaces in the context of design shape optimization using asynchronous high-performance computing - Balaji Raghavan, Laboratoire Roberval - Unité de recherche en mécanique, Laboratoire de Génie Civil et Génie Mécanique |
|
|
15:30 - 16:00
|
Coffee Break |
|
|
16:00 - 17:40
|
High Order Schemes (Agora) |
|
| 16:00 - 16:20 |
› Innovative isogeometric formulations for shear deformable beams and plates - Josef Kiendl, University of Pavia |
|
| 16:20 - 16:40 |
› Behaviour of upwind schemes in low Mach number flow - Simon Delmas, CAGIRE, Laboratoire de Mathématiques et de leurs Applications [Pau] |
|
| 16:40 - 17:00 |
› Patient-specific isogeometric analysis for vascular biomechanics - Mauro Ferraro, Center for Advanced Numerical Simulations, Istituto Universitario di Studi Superiori di Pavia |
|
| 17:00 - 17:20 |
› On the high-order reconstruction for Meshfree Particle Methods in Numerical Flow Simulation - gilles-alexis Renaut, Laboratoire de Mecanique des Fluides et d'Acoustique |
|
| 17:20 - 17:40 |
› Isogeometric analysis for anti-plane fracture problems - Marco Pingaro, Institute for Advanced Studies (IUSS), Department of Civil Engineering and Architecture, University of Pavia |
|
|
16:00 - 17:40
|
Structural Analysis (Badiane) |
|
| 16:00 - 16:20 |
› Influence of strain-induced crystallization on the crack driving force in fracture behavior of rubber - Joachim Guilie, Laboratoire de mécanique des solides |
|
| 16:20 - 16:40 |
› A massively parallel program to solve the phase field formulation for crack propagation - Vahid Ziaei-Rad, Laboratori de Càlcul Numèric |
|
| 16:40 - 17:00 |
› Ductile fracture modeling considering plasticity and damage evolution combined with the strong discontinuity method - Jérémie BUDE, Laboratoire Roberval |
|
| 17:00 - 17:20 |
› Numerical Modelling of Piezoelectric Energy Harvesting Devices - Srivathsan RAVI, University of Luxembourg, Research Unit in Engineering Science |
|
| 17:20 - 17:40 |
› Application of the integral approach and wavelet transform in simulating and analysis of guided waves excitation by axisymmetric partially debonded piezoactuators - Mikhail Golub, Institute for Mathematics, Mechanics and Informatics, Kuban State University |
|
Wednesday, September 4, 2013
| Time |
Event |
|
|
09:00 - 10:00
|
Plenary Session 3 (Agora) - T. Magin |
|
|
10:00 - 10:15
|
Coffee Break |
|
|
10:15 - 11:55
|
Numerical Fluids Mechanics (Agora) |
|
| 10:15 - 10:35 |
› Eddy current interaction between a probe coil and a conducting plate - Vianney REAL, Demaldent, Goubet, Darbas |
|
| 10:35 - 10:55 |
› Quasi-Gasdynamic Algorithm for Magnetohydrodynamic Shallow Water Equations - Maria Istomina, Keldysh Institute of Applied Mathematics |
|
| 10:55 - 11:15 |
› Numerical investigation of interaction between shock waves and dusty flows - Susanna Carcano, Modeling and Scientific Computing [Milano] |
|
| 11:15 - 11:35 |
› A second order cartesian scheme for BGK equation - Florian Bernard, Institut de Mathématiques de Bordeaux, Politecnico di Torino [Torino] |
|
| 11:35 - 11:55 |
› Gas influence in drop impact on dry solid substrates - Zhen JIAN, Institut Jean Le Rond d'Alembert |
|
|
10:15 - 11:55
|
Structural Analysis (Badiane) |
|
| 10:15 - 10:35 |
› Geometrically exact multi-layer beams with a rigid interconnection - Leo Škec, University of Rijeka Faculty of Civil Engineering |
|
| 10:35 - 10:55 |
› Interface finite elements for parametric study of structures with thin constrained layer damping - Lucie Rouleau, Laboratoire de Mécanique des Structures et des Systèmes Couplés, DCNS Group [Nantes] |
|
| 10:55 - 11:15 |
› A geometrically exact spatial beam finite element based on the fixed-pole approach - Maja Gacesa, Faculty of Civil Engineering, University of Rijeka |
|
| 11:15 - 11:35 |
› On spectral approximation algorithm for thermoelastic shells in the nonclassical theory of thermoelasticity with three phase-lags - Gia Avalishvili, Faculty of Exact and Natural Sciences, Iv. Javakhishvili Tbilisi State University |
|
| 11:35 - 11:55 |
› On the analysis of thin walled members in the framework of the Generalized Beam Theory - Alejandro Gutierrez, Università di Bologna - Rosario Miletta, Università di Bologna - Stefano de Miranda, Università di Bologna - Francesco Ubertini, Università di Bologna |
|
|
11:55 - 14:00
|
Lunch |
|
|
14:00 - 15:00
|
Software Session (Agora) |
|
|
15:00 - 16:20
|
Free Time |
|
|
16:30 - 18:30
|
Bordeaux Visit - Walking tour of the historic center of Bordeaux |
|
|
18:30 - 21:00
|
Banquet |
|
Thursday, September 5, 2013
| Time |
Event |
|
|
09:00 - 10:00
|
Plenary Session 4 (Agora) - P. Massin |
|
|
10:00 - 10:15
|
Coffee Break |
|
|
10:15 - 11:55
|
Material Behavior (Agora) - E. Abisset |
|
| 10:15 - 10:35 |
› A micro-meso bridge for the mesoscale modelling of woven composites - Enrico Obert, LMT Cachan |
|
| 10:35 - 10:55 |
› Some approaches to modeling of the effective properties for thermoelastic composites - Anna Nasedkina, Southern Federal University |
|
| 10:55 - 11:15 |
› A multi-scale coupling method to simulate the silica glass behavior under high pressures - Mohamed JEBAHI, Institut de Mécanique et d'Ingénierie -Durabilité Matériaux des Assemblages et des Structures |
|
| 11:15 - 11:35 |
› Dimensionality reduction of a complex constitutive law for Ceramic Matrix Composites - Orestis Friderikos, Laboratoire de Mécanique et Technologie |
|
| 11:35 - 11:55 |
› Biaxial seismic behaviour of reinforced concrete columns - Hugo Rodrigeus, Civil Engineering Department, University of Aveiro, Aveiro, Portugal |
|
|
10:15 - 12:25
|
High Performance Computing (Badiane) - R. Poncet |
|
| 10:15 - 10:45 |
› High performance computing challenges for research and industrial simulation codes - Raphaël Poncet, Commissariat à l'énergie atomique - Direction des applications militaires - Ile-de-France au C |
|
| 10:45 - 11:05 |
› Combining recent HPC techniques for 3D geophysics acceleration - Lionel BOILLOT, MAGIQUE-3D |
|
| 11:05 - 11:25 |
› Efficient computation of large array-based mechanical structures - Augustin Parret-Fréaud, ENSTA ParisTech - Unité de Mécanique |
|
| 11:25 - 11:45 |
› A new C++ workbench to develop discrete element simulations: GranOO - Damien André, I2M-MPI |
|
| 11:45 - 12:05 |
› Development of a parallel third order explicit multirate scheme - Bruno Seny, Institute of Mechanics, Materials and Civil Engineering |
|
| 12:05 - 12:25 |
› Multi-domain large deformations by monolithic approach for massive parallel computing - F. EL Haddad - Centre de mise en forme des matériaux |
|
|
12:25 - 14:00
|
Lunch |
|
|
14:00 - 15:20
|
Material Behavior (Agora) |
|
| 14:00 - 14:20 |
› On the modelling of the aggregates' elasticity in a concentrated suspension of CNTs - Emmanuelle Abisset-Chavanne, Institut de Recherche en Génie Civil et Mécanique |
|
| 14:20 - 14:40 |
› Patient-specific finite element analysis of transcatheter aortic valve implantation - Simone Morganti, University of Pavia |
|
| 14:40 - 15:00 |
› Modeling of Active Skeletal Muscle - Johannes Weickenmeier, Swiss Federal Institute of Technology Zurich |
|
| 15:00 - 15:20 |
› Finite element modeling of the electromechanical coupling in electroactive polymers - Mahmood Jabareen, Technion - Israel Institute of Technology |
|
|
14:00 - 15:30
|
Model Reduction (Badiane) - A. Nouy |
|
| 14:00 - 14:30 |
› Introduction - Anthony Nouy, Institut de Recherche en Génie Civil et Mécanique |
|
| 14:30 - 14:50 |
› A data compression technique for PGD reduced-order modeling - Matteo Capaldo, Laboratoire de Mécanique et Technologie |
|
| 14:50 - 15:10 |
› Virtual charts for shape optimization of structures - amaury courard, Laboratoire de Mécanique et Technologie, EADS Astrium |
|
| 15:10 - 15:30 |
› A reduced numerical strategy based on PGD for composite shell structures simulations - Etienne Prulière, Institut de Mécanique et d'Ingénierie de Bordeaux |
|
|
15:30 - 16:00
|
Coffee Break |
|
|
16:00 - 16:40
|
Applications in Aeronautics (Agora) |
|
| 16:00 - 16:20 |
› Adaptive Multigrid Methods for Fluid-Structure Interaction (FSI) Optimization in an Aircraft and Design of Integrated Structural Health Monitoring (SHM) Systems - Bhuiyan Shameem Mahmood Ebna Hai, Helmut Schmidt University, University of the Federal Armed Forces Hamburg |
|
| 16:20 - 16:40 |
› A study of flow and initial stage of water condensation in the exhaust jet of the aircraft turbofan engine - Maria Lobanova, Baltic State Technical University |
|
|
16:00 - 16:40
|
Verification & Validation (Badiane) - F. Pled |
|
| 16:00 - 16:20 |
› Goal-oriented model calibration using the adjoint framework - Ludovic Chamoin, Laboratoire de Mécanique et Technologies |
|
| 16:20 - 16:40 |
› Mechanical behavior of mild steel up to rupture: characterization and validation - Nelson Souto, Université de Bretagne Sud, Universidade de Aveiro |
|
Friday, September 6, 2013
| Time |
Event |
|
|
09:00 - 10:00
|
Plenary Session 5 (Agora) - M. Arroyo |
|
|
10:00 - 10:15
|
Coffee Break |
|
|
10:15 - 11:35
|
Numerical Fluids Mechanics (Agora) |
|
| 10:15 - 10:35 |
› Numerical study of helium jet injection into channel with sudden expansion - Svetlana Valger, Novosibirsk State University of Architecture and Civil Engineering (Sibstrin) |
|
| 10:35 - 10:55 |
› Coupling two cell-centered finite volume schemes for solving anisotropic diffusion and fluid dynamics on unstructured moving meshes - Pascal JACQ, CEA Cesta |
|
| 10:55 - 11:15 |
› Adaptive Full-Multigrid algorithms based on Riemannian metrics - Gautier Brèthes, SCIPORT |
|
| 11:15 - 11:35 |
› Immersing NURBS for CFD applications - Jérémy Veysset, École des mines de Paris |
|
|
10:15 - 11:15
|
Model Reduction (Badiane) |
|
| 10:15 - 10:35 |
› Hierarchical low-rank approximation of tensors by successive rank one corrections for preconditioning and solving high dimensional linear systems - Loïc Giraldi, Institut de Recherche en Génie Civil et Mécanique |
|
| 10:35 - 10:55 |
› A Tensor-Based Algorithm for the Optimal Model Reduction of High Dimensional Problems - Olivier Zahm, Institut de Recherche en Génie Civil et Mécanique |
|
| 10:55 - 11:15 |
› Combining proper orthogonal decomposition and residual estimates for fast time integration of PDEs - Maria-Luisa Rapun, Universidad Politécnica de Madrid |
|
|
11:40 - 12:00
|
Closing Remarks - Closure |
|
|
12:00 - 14:00
|
Lunch |
|
|
